REAR WHEEL CYLINDER 5/8″ [4412]

Contains 1 x 5/8′ wheel cylinder, 1 x Bleed nipple & 1 x retaining clip.

• 5/8″ rear wheel cylinder was used from 1959-1967 when using disc brakes on the front end (keeps the back end less active).
• Best way to ensure you get the correct cylinder is to disassemble the cylinder that you remove from your vehicle and measure the bore diameter of the cylinder 5/8″ is roughly 15.9mm.
• Quantity one per rear wheel and 2 required per vehicle.
• Suits all disc brake Minis & Mokes.

Alternative Part Number [GWC1101]

NOTE: We strongly recommend if you are replacing 1 side that you also replace the other side wheel cylinder at the same time.