STEERING WHEEL NUT [ACH6001]

1 x Steering wheel nut & 1 x Shake proof washer 

• Large steering wheel nut for all pre air bag models.
• If you only require the shake proof washer see part no. 53K3480
• The washer must be fitted for safety reasons.
• 1 5/16″ spanner size or 33mm socket required to tighten nut to correct tension.

FITTING TIPS

1. Make sure the taper and splines are clean and dry (no grease).

2. Fit the wheel fully home by hand before tightening.

3. Place shake proof washer over thread then hand tighten steering wheel nut.

4. Using a 1″ 5/16 socket and tension wrench Torque to 40–45 ft/lb.