MINI & MOKE 1275 PRIMARY GEAR WASHER 112-114 [DAM6490]

PRODUCT OVERVIEW

Primary gear thrust washer/shim to suit 1275cc Mini and Moke A-Series engines fitted with the stepped crankshaft.

Primary gear thrust washers are used to correctly set the primary gear end float. This clearance is important for smooth clutch operation, correct gearbox function and long-term reliability. Too much play can cause excessive wear and noise, while too little clearance can create drag and premature component damage.

This washer measures between .112″ and .114″ and is one of several sizes available to allow the correct end float to be achieved during engine and gearbox assembly.

SPECIFICATIONS

• Suits: Mini and Moke 1275cc A-Series engines
• Application: Primary gear thrust washer / shim
• Crankshaft type: 1275cc stepped crankshaft only
• Washer size: .112″ to .114″
• Metric size: 2.84mm to 2.89mm
• Standard primary gear end float: .003″ to .006″
• Race applications: Clearance may be increased by approximately .003″
• Alternative sizes available separately: [DAM6486], [DAM6487], [DAM6488], [DAM6489] and [DAM6492]
• 1 required per engine

IMPORTANT FITMENT NOTE

This washer is for 1275cc stepped crankshafts only. These cranks have a raised step for the primary gear to sit on.

Always measure the primary gear end float during assembly and select the correct washer size to suit your engine. The listed washer size is measured with a plus or minus .001″ tolerance, giving each part number an approximate .002″ working range.